Hydraulic Cylinder Position Sensor Application Information

     ME Series Linear Position Sensor Installed in a Hydraulic Cylinder

 

ME Series

 

Alliance Sensors Group offers in-cylinder position sensors to replace magnetostrictive technology at a lower installed and ownership costs. The LVIT ME series embedded sensor is placed in the same location as the other technologies as shown above. The sensor uses the gun drilled hole in the rod and piston assembly as the target. Typically a 10mm dia. hole is drilled but other sizes can be sensed. The unit is provided with a cable outlet for the electrical connections.    

     MR Series Linear Position Sensor port mounted in a Hydraulic Cylinder

 

MR Series

 

Alliance Sensors Group offers in-cylinder position sensors to replace magnetostrictive technology at a lower installed and ownership costs. The  LVIT MR series externally mounted sensor is placed in the same location as the other technologies as shown above. The sensor uses the gun drilled hole in the rod and piston assembly as the target. Typically a 10mm dia. hole is drilled but other sizes can be sensed. The unit is provided with a cable or connector outlet for the electrical connections.    

 

For more information contact our application engineering group at 856-727-0250 or send us a message by clicking here.

Application Notes Categories