Hydraulic Cylinder Linear Position Sensor

LVIT - Hydraulic Cylinder Position Sensors

Need help deciding which sensors is right for your application? Have questions about a particular product? Speak to an experienced application engineer at H. G. Schaevitz Alliance Sensors Group by calling us at 856-727-0250 or contact us by clicking here.

LVIT Linear Position Sensor MHP-7 Series

The MHP-7 Series LVIT (Linear Variable Inductance Transducer) Position Sensors from Alliance Sensors Group were designed to be installed into the rear endcap of hydraulic cylinders having a female o-ring port. Their 1-inch hex aluminum or stainless steel housings are ideal for operation up to 5000 psig (350 bar) in high pressure mobile hydraulic systems, factory automation machinery, or oil and gas exploration equipment.
The MHP-7 series sensors are based on a proprietary contactless sensing technology with a good stroke-to-length ratio. They employ a 7 mm diameter sealed inductive probe inserted into a gun-drilled hole in the cylinder rod to measure ...

The ME-7 Series LVIT (Linear Variable Inductance Transducer) Position Sensors from Alliance Sensors Group has been designed as an alternative to magnetostrictive sensors and has more robust construction and a lower cost of ownership. The unit can be embedded into the end cap of industrial or mobile hydraulic cylinders and pneumatic actuators. These ME-7 Series sensors are based on a proprietary contactless inductive sensing technology that employs a 7 mm diameter probe with a shorter stroke-to-length ratio than most other technologies, and uses a gun drilled hole in the cylinder rod for sensing the rod position rather than requiring a ring magnet assembly.

The MR-7 Series LVIT (Linear Variable Inductance Transducer) Position Sensors from Alliance Sensors Group has been designed as an alternative to magnetostrictive sensors and has more robust construction and a lower cost of ownership. The unit can be port mounted in industrial or moble hydraulic cylinders and pneumatic actuators. These MR-7 Series sensors are based on a proprietary contactless inductive sensing technology that employs a 7 mm diameter probe with a shorter stroke-to-length ratio than most other technologies, and uses a gun drilled hole in the cylinder rod for sensing the rod position rather than requiring a ring magnet assembly. An MR-7 has a ...

The SS-7 series LVIT (Linear Variable Inductance Transducer) position sensors from Alliance Sensors Group have been designed to give cylinder position feedback in subsea environments with depths up to 12,000 ft or in a PBOF (pressure balanced oil filled) chamber for oil and gas exploration, blow out preventers, ROVs, and relief valves.

The SS-7 requires no magnet and is based on a proprietary contactless inductive sensing technology that employs a 7 mm diameter probe with good stroke to length ratio to save space. The SS housing is 1-inch diameter, 316 stainless steel and comes standard with a subsea connector. They are offered in ranges from 25 ...

Our Technical Support Staff: We have more than 150 years and three generations in the position sensor business and are expert application engineers at what we sell. We have real world experience and know how to solve your measurement challenges. Need help technical help with your measurement application? Call us today 856-727-0250.

Our Web Site: We are constantly improving our website and adding new sensors to our product offerings.

Products By Application

Products By Type

Technical Information

Corporate Info

Hydraulic Cylinder Linear Position Sensor

LVIT Linear Position Sensor MHP-7 Series

LVIT Linear Position Sensor ME-7 Series

LVIT Linear Position Sensor MR-7 Series

LVIT Linear Position Sensor Subsea SS-7 series

Have a Question?

Popular Content

Today's:

All time:

Last viewed: