Find More Information About Thermocouple Products Here

Temperature Sensors

Need help deciding which sensors is right for your application? Have questions about a particular product? Speak to an experienced application engineer call us today at H. G. Schaevitz Alliance Sensors Group 856-727-0250 or e-mail us at sales@alliancesensors.com

Digital Thermocouple or RTD Temperature Scanner Indicator 8, 16, 24, or 32 Channel

This Thermocouple/RTD scanner is perfect for any multi-point temperature measurement application. The bright red LED display is easy to read, even at a distance. Splash-resistant front panel keypad is easy to clean & wipe down. The meter has 2 user-selectable HI/LO, HI/HI, or LO/LO alarm set points, configured through the front panel push buttons. During an alarm condition a front panel LED annunciator is enabled & an internal 2 Amp relay contact output is engaged. The meter display will cycle through all input channels at a user determined rate of 0.5~10 seconds. 24 VDC powered. A must have for multi-point temperature monitoring in the Lab, ...

The Sensor Connection TCA-MS-K-8-A4 EGT Probe Thermocouple Amplifier Module functions to convert the low output voltage signal from up to 8 Type K thermocouple probes into 8 independent linearized 0 to 5 VDC output voltages. This output is ideal for interfacing to dataloggers, aftermarket ECU's, temperature indicators, chart recorders, controllers, or other instrumentation equipment.

The Sensor Connection TCA-MS-K-1 Thermocouple Amplifier Module functions to convert the low output voltage signal from a Type K thermocouple probe into a linearized 0 to 5 VDC output voltage. This output is ideal for interfacing to dataloggers, aftermarket ECU's, temperature indicators, chart recorders, controllers, or other instrumentation equipment.

Kit Includes: EGT Probe, Marine Duty Digital Pyrometer Gauge with Audible High Temperature Alarm, Adjustable Compression Fitting, Stainless steel weld bung, plus Extension Cable + Connectors (Recommended for fuel types: Diesel & Biodiesel)

Kit Includes the Fast Response Foul Proof Diesel EGT Probe, Digital Pyrometer Gauge, and Adjustable Compression Fitting (Recommended for fuel types: Diesel & Biodiesel)

The Sensor Connection EGT Digital Pyrometer Gauge and Probe Kit for Diesel Racing is a type K thermocouple with bendable probe. Designed for engine testing and racing environments, the EGT Digital Probe has an Inconel sheath for protection and can sense temperatures to to over 2300 degF.

The Sensor Connection EGT Digital Pyrometer Gauge and Probe Kit can be used is a broad variety of applications in the automotive engine testing and racing environments as well as industrial applications such as small turbines, plastic molding machines, and steel smelting operations. The Kit includes the bendable probe and meter assembly.

Kit Includes the CHT FS Series Cylinder Head Temperature Sensor and Digital Pyrometer Gauge

Kit Includes the CHT WS Series Cylinder Head Temperature Sensor and Digital Pyrometer Gauge

The Sensor Connection Type J Thermocouple Sensor Probe Industrial Head Assembly is offered with 5, 11, or 17" probes and was designed for applications like kilns, gas turbine exhaust, and diesel and gas engines. The probe has a 316 SS sheath and is .250" in outer diameters.

The Sensor Connection RTD probe is a 3 wire sensor with a range of -50 to 650C. Its probe is offered in 5, 11, and 17" lengths and is .250" in outer diameter with a 316 SS sheath for protection.

The Cylinder Head Temperature Sensor (CHT Sensor) is designed for surviving high vibration and temperatures up to 1832 degrees F (1000 degrees C). The sensors will fit most 12 mm, 14 mm, or 18 mm spark plugs. The sensor cable lead length is 6 feet (1.8 meters). Install between the cylinder head and spark plug hex.

The sensor cable is over-braided in stainless steel for heavy-duty abrasion resistance. The signal wires are PTFE insulated. Designed to deliver high performance, high temperature measurements, reliably and consistently in the most extreme operating conditions.

The high temperature sensors of choice for professional racing teams, ...

The Cylinder Head Temperature Sensor (CHT Sensor) is designed for surviving high vibration and temperatures up to 600 degrees F (315 degrees C). The sensors will fit most 12 mm or14 mm spark plugs. The sensor cable lead length is 6 feet (1.8 meters). Install between the cylinder head and spark plug hex.

The high temperature sensors of choice for professional racing teams, R&D test ...

The Surface Temperature Thermocouple with Miniature Copper Pad is designed for use in R&D and Testing of Heat Exchangers, Radiators, HVAC, PCBA's and other temperature testing applications requiring a small foot print. The sensor is made in the USA with superior materials, designed to withstand even the most rigorous testing conditions.

Typical temperature measurement applications are, but not limited to:

Liquid cooled radiator assemblies such as tubes, tanks and fins.
Heat exchanger elements
HVAC Condensers
Forced air ...

This new self-sticking stick on Type K thermocouple probe has been engineered to perform in higher temperature thermocouple applications up to 500° F. The small size and quick response time will make these a real favorite around the lab and the track.

They apply easily and give an accurate reading up to 500 Degrees F. They can be used any where you need critical temperature measurements for intake and exhaust manifolds, water jackets, transmission, engine blocks and housings.

This item includes a mini-male connector & 15 feet of cable (5 meters)

The Sensor Connection Type K Thermocouple Sensor Probe Industrial Head Assembly is offered with 5, 11, or 17" probe lengths and was designed for use with Kilns, gas turbine exhaust, and diesel or gas engines. The Probe is .250" in outer diameter and has a 316 SS sheath for protection.

Overview

The Weld Pad Surface Temperature Thermocouple Probe is designed for use in industrial applications to measure surface temperature by way of attachment via weld, braze, or clamp. The pad is flexible to easy form to the contour of a flat or curved surface. The probe is made in the USA with superior materials, designed to withstand even the most rigorous operating conditions.

• Pad material is 304 stainless steel
• Pad dimensions are 1.0" x 1.0" x 0.01" (25mm x 25mm x 0.25mm)
• Pad can be brazed, welded, or clamped to surface
• Stem is flexible

Our Technical Support Staff: We have more than 150 years and three generations in the position sensor business and are expert application engineers at what we sell. We have real world experience and know how to solve your measurement challenges. Need help technical help with your measurement application? Call us today 856-727-0250.

Our Web Site: We are constantly improving our website and adding new sensors to our product offerings.

Products By Application

Products By Type

Technical Information

Corporate Info

Find More Information About Thermocouple Products Here

Digital Thermocouple or RTD Temperature Scanner Indicator 8, 16, 24, or 32 Channel

8-Channel Type K Thermocouple Amplifier Signal Conditioner Module with 0 to 5 VDC Analog Output

Type K Thermocouple Amplifier Signal Conditioner Module with 0 to 5 VDC Analog Output

EGT Digital Pyrometer Gauge + Probe Kit - Marine Engines

EGT Digital Pyrometer Gauge + Probe Kit - Gas Race Series EP

EGT Digital Pyrometer Gauge + Probe Kit - Diesel Race Series DF

EGT Digital Pyrometer Gauge + Probe Kit - Diesel Commercial Industrial Series DP

CHT Digital Pyrometer Gauge and CHT Cylinder Head Temperature Sensor Kit FS

CHT Digital Pyrometer Gauge + CHT Cylinder Head Temperature Sensor Kit WS

Thermocouple Sensor Probe Industrial Head Assembly - Type J

RTD Sensor Probe Industrial Head Assembly - PT100 3-Wire

Type K - CHT Cylinder Head Temperature Sensor - Flexible Stem Type

Type J - CHT Cylinder Head Temperature Sensor - Ring Terminal Type

Surface Temperature Thermocouple with Miniature Copper Pad

Surface Mount Fast Response Stick On Thermocouple with Mini Connector

Thermocouple Sensor Probe Industrial Head Assembly - Type K

Weld Pad Surface Temperature Thermocouple Probe

Have a Question?

Popular Content

Today's:

All time:

Last viewed: