LVIT Spring Loaded Linear Postion Sensor GHS-19 Series

For use in:

Factory Automation Systems

PLC Position Feedback

Test and Measurement

Packaging Equipment

GHS-19 Series

Spring-Loaded LVIT Linear Position Sensors

Low Cost, Compact, High Performance Gaging Probes

The GHS-19 series of LVIT (Linear Variable Inductive Transducer) spring-loaded position sensors by Alliance Sensors Group are contactless devices designed for dimension measurements in QA labs, or position measuring applications in factory automation systems and in various industrial and commercial applications such as automotive testing, mil/aero test stands, robotic arms, and packaging equipment, where the sensing element cannot be attached to the object being measured. GHS-19s are offered in nominal full scale ranges from 6.35 to 100 mm (0.25 to 4.0 inches) with excellent resolution and high stroke-to-body-length ratios. The maximum tip contact force on the item being measured is 1 pound.

GHS-19 sensors have a 0.75 inch (19 mm) diameter aluminum or stainless steel body with a 1/2-20 UNF-2A thread 1.5 inches (38 mm) long with two 19 mm (0.75 inch) hex jam nuts for drop-in installation in place of a spring-loaded DC LVDT gage head. These sensors utilize a probe equipped with a No. 9 contact tip, and are offered with a PT02A-10-6P connector. Operating from a variety of DC voltages, they are available with a choice of one of four analog outputs. They all include ASG’s proprietary SenSet™ field calibration feature.

Technical information and the data sheet can be found below..

Features

Spring-loaded LVIT Technology™ (Linear Variable Inductance Transducer)
Contactless operation prevents internal wearout from dithering or rapid cycling
Excellent stroke-to-body-length ratio
Proprietary Senset™ Field Adjustable Range Scaling

Specifications

Analog I/Os:	0 - 5 or 0.5 - 4.5 VDC output with 8 - 30 VDC input, 35 mA max. 0 - 10 VDC output with 12 - 30 VDC input, 35 mA max. 4 - 20 mA (3-wire) output with 18 - 30 VDC input, 60 mA max. (75 C max.)
Measuring Ranges:	6.35 mm to 100 mm (0.25 to 4.0 inches) full scale (nominal)
Linearity Error:	±0.15% of Full Scale Output (FSO) typical, ±0.25% max.
Resolution:	0.025% of FS
Operating Temperature:	-20 to 85 C (-40 to 105 C Extended Range)
Temperature Coefficient:	±0.015% of FS/K
Vibration:	5-20 Hz, 0.5 inch p-p; 20-2000 Hz, 4.2 g p-p
Shock:	1000 g, 11 msec.
Terminations:	IEC IP-67
Humidity:	95% RH, non-condensing

Ordering Information

				Electrical Termination
Series	Output Type	Housing Diameter	Range (mm)	Axial or Radial	Termination	Output	Housing Material
GHS	X-	XX-	XXX-	X-	XX-	XX	X-
	E- voltage	19- 19 mm	006 (6.35 mm)	A- Axial	00- 1 m cable	05- 0.5 to 4.5 V DC	A- Aluminum
	I- current		013		01- 5-pin M-12	06- 4.5 to 0.5 V DC	S- 300 Series SS
			025		02- 6-pin PT02	10- 0 to 10 V DC
			050		03- 3 m cable	11- 10 to 0 V DC
			075			20- 4 to 20 mA DC
			100			21- 20 to 4 mA DC
						50- 0 to 5 V DC
						51 - 5 to 0 V DC

Configuration Information

Wiring Table
I/O Function	PT02A-10-6P 6-Pin
+DC Power Input	E
Common Ground	D
Voltage Output	A
Current Output	A
SenSet™	B

'A' Nominal Range	'B' Body Length	Spring Rate	Max. Force
inches [mm]	inches [mm]	Lbf/in [kgf/cm]	Lbf [kgf]
0.25 [6.35]	3.50 [88.9]]	0.75 [0.134]	0.9 [0.41]
0.5 [12.7]	3.50 [88.9]]	0.75 [0.134]	0.9 [0.41]
1.0 [25.4]	4.00 [101.6]	0.75 [0.134]	0.9 [0.41]
2.0 [50.8]	5.08 [129.0]	0.43 [0.077]	1.0 [0.45]
3.0 [76.2]	6.16 [156.5]	0.30 [0.054]	1.0 [0.45]
4.0 [101.6]	7.25 [184.1]	0.23 [0.041]	1.0 [0.45]

All dimensions and specifications are nominal. With our policy of on-going development and design improvements, specifications may change without notice. Modifications may affect some or all of the mechanical electrical and or performance specifications of our product. Please make sure to contact us for the most up to date information.

Download LVIT Spring Loaded Position Sensor GHS-19 Datasheet

Download LVIT Spring Loaded Position Sensor GHS-19 Outline Drawing

Video

Our Technical Support Staff: We have more than 150 years and three generations in the position sensor business and are expert application engineers at what we sell. We have real world experience and know how to solve your measurement challenges. Need help technical help with your measurement application? Call us today 856-727-0250.

Our Web Site: We are constantly improving our website and adding new sensors to our product offerings.

Authorized

Distributors For:

Temperature Sensing Products

Have a Question?

Need pricing or have questions about a product?

Speak to an experienced application engineer at H. G. Schaevitz Alliance Sensors Group by calling us at 856-727-0250 or contact us by clicking here.

We will provide you with fast reliable service the first time you call.

Products By Application

Products By Type

Technical Information

Corporate Info

LVIT Spring Loaded Linear Postion Sensor GHS-19 Series

Have a Question?

Popular Content

Today's:

All time:

Last viewed: