LVDT Signal Conditioner DIN Rail Mounted SC-200 Series

For use in:

OEM Measurement Systems

Steel/Aluminum/Paper Mills

Test and Measurement

Factory Automation

SC-200

Advanced Smart Industrial AC-LVDT Signal Conditioner

Alliance Sensors Group's SC-200 DIN-rail-mounting LVDT signal conditioner for industrial measuring systems, testing laboratories, and factory automation offers push buttons for fast and easy calibration of the Full Sale and Zero outputs, differiential input to minimize ground loop noise, and color-coded screw terminal plugs for quick hook up. The SC-200 is engineered to work with a very wide range of LVDT, RVDT, and inductive half-bridge (LVRT) sensors by providing four excitation frequencies that operate most AC-LVDTs over a 50 to 5,00 mVrms range of sensor output. SC-200 modules offer a choice of 8 analog outputs and half-duplex RS-485 digital comm port to faciliate remote setup and for saving a module's setup parameters to hot-swap them with another module.

The SC-200 manual and datasheet are below.

Features

Cybersecurity lock to prevent tampering
Smart calibration by front panel push buttons
Differential input for superior noise immunity
Color-coded screw terminal plugs
Auto-mastering
Hot swapability
Diagnostics:
Shorted, disconnected, or open primary
Shorted, grounded, disconnected, or open secondaries
Output voltage shorts or current loop opens
Errors during installation and setup

Specifications

Operating Power:	+15 to +30 V DC (+24 V nominal), 80 mA max. at 24 V DC; +15 V DC and -15 V DC needed for ±10 V DC bipolar output
Excitation Voltage:	3.0 Vrms (nominal) push-pull drive (factory default), 4.5 Vrms (nominal) push-pull drive (via jumper change), 1.5 Vrms (nominal) single ended drive (for low impedance primary)
Excitation Frequencies:	2.5 kHz, 5 kHz, 7.5 kHz, 10 kHz (nominal)
Auto-Master Syncing:	Master output controls up to fifteen slave units
LVDT Output Range:	50 to 5000 mVrms at LVDT’s full scale position
Analog DC Outputs:	0 - 5 V, 1 - 5 V, 0.5 - 4.5 V, 0.5 - 9.5 V, 0 -10 V, -10 to +10 V, 0 - 20 mA sourcing (3-wire), 4 - 20 mA sourcing (3-wire)
Loop Resistance:	850 Ohms maximum with 24 V DC supply
Output Non-Linearity:	≤±0.025% of Full Span Output (FSO)
-3 dB Response:	10% (min.) of excitation frequency (normal setting); 10 Hz (default) user adjustable (low noise setting)
Noise and Ripple:	≤1 mVrms (voltage output); ≤2 μArms (current loop output)
Fault Detection:	Open LVDT windings, shorted or grounded LVDT connections, cable disconnected, voltage output shorted or current loop open
Failure Indications:	Front panel LED's; NO/NC open-collector switch
Null Detection:	Front panel LEDs; ±3V DC null output signal
Operating Temperature:	-20 to 75 C
Temperature Coefficient:	±0.002% of FSO/°C (combined zero and span shift)
Zero Set:	Front panel push button or RS-485 command
Full Scale Set:	Front panel push button or RS-485 command
Digital Interface:	RS-485 2-wire multi-drop network, 16 addresses
Cybersecurity Lock:	User enabled

Configuration Information

All dimensions and specifications are nominal. With our policy of on-going development and design improvements, specifications may change without notice. Modifications may affect some or all of the mechanical electrical and or performance specifications of our product. Please make sure to contact us for the most up to date information.

AC LVDT Signal Conditioner SC-200 Manual

AC LVDT Signal Conditioner SC-200 Datasheet

AC LVDT Signal Conditioner SC-200 Quick Start Guide

Video

Our Technical Support Staff: We have more than 150 years and three generations in the position sensor business and are expert application engineers at what we sell. We have real world experience and know how to solve your measurement challenges. Need help technical help with your measurement application? Call us today 856-727-0250.

Our Web Site: We are constantly improving our website and adding new sensors to our product offerings.

Authorized

Distributors For:

Temperature Sensing Products

Have a Question?

Need pricing or have questions about a product?

Speak to an experienced application engineer at H. G. Schaevitz Alliance Sensors Group by calling us at 856-727-0250 or contact us by clicking here.

We will provide you with fast reliable service the first time you call.

Products By Application

Products By Type

Technical Information

Corporate Info

LVDT Signal Conditioner DIN Rail Mounted SC-200 Series

Have a Question?

Popular Content

Today's:

All time:

Last viewed: