AllianceSensors.com - H.G. Schaevitz LLC Click here for Home Page       

            

Products By Application

  • Aerospace / Military
  • Civil Engineering
  • Energy and Power Generation
  • Factory Automation Linear Position Sensors
  • Hydraulic Cylinder Position Sensors
  • Industrial / OEM
  • Subsea / Marine Hydraulics
  • Mobile Hydraulics
  • Motor Sports

Products By Type

  • Hydraulic Cylinder Position Sensors
    • Embedded
    • Port Mounted
  • Linear Position Sensors
    • LVIT Position Sensors
      • LVIT - Industrial Automation
      • LVIT - Heavy Duty Industrial
      • LVIT - Extreme Duty
    • LVDT Position Sensor Products
      • LVDT - Power Generation
      • LVDT - Heavy Duty
      • LVDT - Industrial
    • LVDT - Gauging Probes
      • Digital Gauging Probes
      • Analog Gauging Probes
    • Linear Potentiometer Position Sensor
  • Sensor Signal Conditioning and Instrumentation
  • Temperature Sensing Products
    • Temperature Probes
    • Thermocouple Heads
    • Pyrometer Meters and Electronics
    • Pyrometer Kits
  • Rotary Sensors
    • All Rotary Sensors
  • Sensor Mounting Accessories
  • Spring Loaded LVIT

Technical Information

  • Product Catalog
  • Application Notes
    • Linear Position Sensor
    • LVDT Position Sensor
    • LVDT Signal Conditioning
    • Rotary Position Sensor
    • Position Sensor Technology Comparison
  • Datasheets
  • Manuals
    • Product Manuals
  • FAQ
    • Linear Position Sensor FAQ
    • LVDT Position Sensor FAQ
    • LVDT Signal Conditioning FAQ
    • Rotary Position Sensor FAQ
    • Position Sensor Technology Comparison
  • Downloads
    • GUI Software for SC-100
    • GUI Software for S1A

Corporate Info

  • Contact Us
  • Reps and Distributors
  • About Our Company
    • About Our Company
    • Alliance Sensors Group Terms and Conditions
    • RMA Evaluation Fees for returns
  • News Articles
    • The Three Rs of Sensors
    • True Cost of Ownership - parts 1, 2, and 3
    • LVIT Technology Factory Automation
    • LVIT Technology: What is it and where does it fit into the sensor world?
    • Industrial Trends
    • Position Sensor Technology Comparison for hydraulic cylinder feedback
    • Bridge Monitoring Systems
    • GE Position Sensors on Power Gen Turbines
    • What's So Good About LVIT Technology
    • LVIT Technology™ Solves the Age Old Problem- Reliability vs Cost
    • S1A Used to Solve Multi-channel LVDT Measurement System Susceptibly
  • Press Releases
  • Site Map

LVDT Signal Conditioner DIN Rail Mounted SC-100

For use in:
Pencil Gaging Probe Systems
Industrial LVDT Position Sensors
Inductive Half-Bridge Linear Sensors
LVDT-based Redundant Control Systems
LVDT Signal Conditioner DIN Rail Mounted SC-100
SC-100 DISCONTINUED SEE SC-200 BELOW
LVDT Signal Conditioner
Smart Industrial AC-LVDT Signal Conditioner Module

DISCONTINUED PLEASE REVIEW THE NEW SC-200

Alliance Sensors Group’s new SC-100 DIN-rail-mounting smart LVDT signal conditioner module makes setting up and calibrating an AC-LVDT installation very easy by offering built-in null indicators and front panel pushbuttons to set zero and full scale output. Engineered to work with the widest range of LVDT and inductive half-bridge linear sensors, the SC-100 module offers a choice of 4 excitation frequencies, works over a 40 dB range of full scale sensor outputs, and features 8 analog DC outputs, including a bipolar voltage output for legacy systems. Using its 2-wire RS-485 digital communications port, a user can remotely set up and operate an SC-100 module from a personal computer, and can get information for data acquisition. The very reliable SC-100 module comes with a 2-year limited warranty and offers many additional features that make it the easiest to use and best value of any industrial single channel AC-LVDT signal conditioner currently available.


Features
  • Smart calibration setup with front panel push buttons --- no pots, no calculations
  • Built-in null indication --- front panel LEDs and DC null voltage output
  • 2.5 kHz, 5.0 kHz, 7.5 kHz, and 10.0 kHz nominal excitation frequencies
  • Fail-safe excitation syncing by auto-mastering prevents cross talk in multiple units
  • Works with LVDT full scale outputs ranging from 50 mV to 5000 mV
  • Half-duplex digital communications via RS-485 2-wire multi-drop bus
Options
  • USB to RS485 cable
Specifications
Operating power: +15 to +30 V DC (+24 V nom.), 60 mA max. at 24 V DC; +15 V DC and -15 V DC needed for ±10 V DC bipolar output
Excitation voltage: 3.0 Vrms (nom.) push-pull drive (factory default) 4.5 Vrms (nom.) push-pull drive (via jumper change) 1.5 Vrms (nom) single ended drive (for low impedance primary)
Excitation frequencies: 2.5 kHz, 5 kHz, 7.5 kHz, 10 kHz (nominal)
Auto-master syncing: Master output couples up to fifteen slave units; if master fails, new master is automatically generated for fail-safe excitation
LVDT AC output range: 50 mVrms to 5000 mVrms at LVDT’s full scale position
Analog DC outputs: 0 - 5 V, 1 - 5 V, 0.5 - 4.5 V, 0.5 - 9.5 V, 0 - 10 V, -10 to +10 V, 0 - 20 mA sourcing, 4 - 20 mA sourcing
Loop resistance: 850 Ohms max. with 24 V DC supply
Output non-linearity: ≤0.025% of Full Span Output (FSO)
-3 dB response: 10% of excitation frequency minimum (normal setting); 10 Hz (default) user adjustable (low noise setting)
Noise and ripple: ≤2.5 mVrms (voltage output); ≤5 μArms (current loop output)
Null indicators: Front panel LEDs
Null output signal: Up to ±3 V DC
Operating temperature: -20 to 75 C
Temperature coefficient: ±0.002% of FSO/°C (combined zero and span shift)
Zero set: Front panel push button or RS-485 command
Full scale set: Front panel push button or RS-485 command
Digital interface: RS-485 2-wire multi-drop network, 16 addresses
Configuration Information

LVDT Signal Conditioner DIN Rail Mounted SC-100
All dimensions and specifications are nominal. With our policy of on-going development and design improvements, specifications may change without notice. Modifications may affect some or all of the mechanical electrical and or performance specifications of our product. Please make sure to contact us for the most up to date information.
Download SC-100 LVDT Signal Condtiioner Datasheet
Download S1A & SC-100 RS485 quick start
Download SC-100 LVDT Signal Conditioner Operating Manual
Downloadable GUI Software for S1A or SC-100

Our Technical Support Staff:  We have more than 150 years and three generations in the position sensor business and are expert application engineers at what we sell. We have real world experience and know how to solve your measurement challenges. Need technical help with your measurement application? Call us today 856-727-0250. 

Our Web Site: We are constantly improving our website and adding new sensors to our product offerings.

 

Authorized 

Distributors For:

HGSI Temperature Sensing Products

Temperature Sensing Products

Have a Question?

Need pricing or have questions about a product?

Speak to an experienced application engineer at H. G. Schaevitz Alliance Sensors Group by calling us at 856-727-0250 or contact us by clicking here.

We will provide you with fast reliable service the first time you call.

Popular Content

Today's:

  • Linear Position Sensor Calibration using SenSet® Field Programmability
  • About Our Company HG Schaevitz LLC Alliance Sensors Group
  • What's So Good About LVIT Technology and What Is It All About, Anyway?

All time:

  • About Our Company HG Schaevitz LLC Alliance Sensors Group
  • LVDT Signal Conditioner DIN Rail Mounted S1A Series SUPERCEDED BY S2A

Last viewed:

  • LVDT Signal Conditioning Software Download Page
  • RED CROWN™ LVDT AND HBT ANALOG PENCIL PROBE LINE
  • Type K Thermocouple Amplifier Signal Conditioner Module with 0 to 5 VDC Analog Output